496 Fuel Tank Filter Assembly For Gasoline and Diesel Water Separate 30 Micron

Description

Home
Payment
Shipping
About us
Contact us
Details
496 Fuel Tank Filter Assembly Replacement for Gasoline and Diesel Water Separate 30 Micron Max 25gpm 150psi with Zinc 1" NPT Top Cap Replaces B10-AL
Product Description
Compatible with fuel types:Fits common fuels such as unleaded gas,diesel,fuel oil,up to 20% biodiesel and related additives.
Fuel filter element:30 micron,Provide high flow rates and superior filtration efficiency,protect fuels from particles such as rust,sand,dirt and water.With protective sheet to prevent the filter element from being destroyed or deformed by pressure.
Top cap:Zinc die-cast,with 1" NPT pipe fittings inlet and outlet marked at the top of the cap.
Hyaline bowl:Makes it easy to visual monitor the fuel flow,the fuel flow will slow down when you need to replace the element.Drain valve installed at the bottom to drain water.
Feature:Flow rate max 25 gpm.Working pressure up to 150 psi.Gravity flow rate is approximately 5 gpm.
Suitable fuel type
This Tank Filter is Designed for Use With Gasoline,Diesel or 20% Biodiesel (B20) Fuels.
Installation
1.Attach filter top cap to storage tank valve on opening marked “IN”.
2.Attach hose and nozzle to filter opening marked “OUT”.
3.When installing the element and bowl, apply a coating of oil to each side of gasket.
4.These components should be hand tightened only.Over tightening of the filter bowl will result in difficulty in removal at a later date.
5.When assembly is complete, check for leaks.
Feature
Fuel filter element:30 micron with protective sheet
Height:9.5”
Inlet /Outlet size:1” NPT
Hyaline bowl with Drain valve
Flow rate:Max 25 gpm
Working pressure:Up to 150 psi
Gravity flow rate:Approximately 5 gpm
Payment Method
Shipping Policy
Returns Policy
About us
Contact us
Payment
Delivery Details
Returns Policy
[RETURN_POLICE]
About US
Contact US
Home
Payment
Shipping
About us
Contact us