-40%

4x SunBoard Complete DIY Kit Samsung lm561c LEDs w/450/660/730nm Grow Light HLG

$ 78.4

Availability: 290 in stock
  • Beam Angle: 120°
  • Maximum Wavelength: 730nm
  • Lighting Technology: LED
  • Manufacturer Warranty: 1 year
  • Suitable For: Flowering
  • Wattage: 175w
  • Input Voltage: 120 V
  • Minimum Wavelength: 450nm
  • Spectrum: Blue
  • Dimming Settings: Variable
  • Condition: New
  • All returns accepted: ReturnsNotAccepted
  • Type: LED (Light Emiting Diode)
  • Number of LEDs: 384
  • Brand: GrowDaddyLEDs.com

    Description

    WHEN IT COMES TO GROW LIGHTING,
    THE BEST OPTION AVAILABLE IS STRIPS
    1) COVERAGE - make it any size/shape you want/even side lighting is possible
    2) CANOPY PENETRATION - more leds spread out gets deeper into canopy
    3) VERSATILITY - add on or reconfigure any time you want
    We at GrowDaddyLEDs.com are committed to helping you
    set up your grow with the largest and best selection of strips around.
    This Complete DIY Kit has 4 - 96 LED Strips using the Samsung
    lm561c with
    its still amazing
    up to 210 lm/w efficiency and the added
    benefit of boosters in 450nm
    Royal Blue, 660nm Deep Red, and
    730nm Far Red(IR)
    All you'll need is a drill, a 1/8" bit, wire strippers, and a phillips
    screwdriver to build a light up to 18" x 36".
    -------
    THIS LISTING INCLUDES:
    4 -
    30mmx 400mm 96 LED Strips
    EACH STRIP HAS
    :
    86 - SAMSUNG LM561C LEDs
    in your choice of spectrum(2700k, 3000k, 3500k, and 6500k)
    4 - 450nm(Royal Blue) LEDs
    4 - 660nm(Deep Red) LEDs
    2 - 730nm(Far Red-IR) LEDs
    4 - 40mm x 450mm Heatsinks
    TAPE PRE-APPLIED TO STRIPS
    3 FT POWER CORD(6, 10, or 15ft available)
    Your choice of two different Meanwell HLG drivers w/built in potentiometers for dimming
    Meanwell HLG-120H-48A(150w+ at the wall)
    Meanwell HLG-150H-48A(175w+ at the wall)
    WAGO type connectors for power cord and strip hookup
    6 ft 18GA SOLID CORE WIRE
    2 - 18", 24", 32", or 36" lengths of 1/2" ANGLE ALUMINUM in 1/16"(Choose in Item Length option)
    SCREWS TO ASSEMBLE
    -------
    CLICK HERE FOR THE LISTING WITH JUST THE FOUR STRIPS
    CLICK HERE FOR THE LISTING WITH 4 STRIPS WITH HEATSINKS
    STRIP SPECS
    :
    24V
    44-48W max recommended
    1800mA max recommended
    30mm x 400mm each
    Dual Connectors(easier to wire in series and/or parallel)
    2oz RA Copper
    EXTRUDED ALUMINUM HEATSINKS
    :
    40mm x 450mm x 10mm each
    Over half a pound each
    This listing is for 4 of these strips with heatsinks to mount them on, aluminum angle(2 each of 18", 24", 32" or 36" length) to build a frame with and everything you need to get them growing, including your choice of Meanwell HLG drivers with built in potentiometers for dimming, power cable for driver and wago style connectors for hook up. We will pre-apply 30mm double sided thermal conductive tape on the boards for you so all you will need to do is pull the release paper and press them onto your heatsinks for great holding power plus you gain the benefit of transferring the heat to the included 40mm x 450mm heatsink much better. All you will need is a drill and 1/8" bit, a good phillips screwdriver, and some wire strippers. These are 30mm x 400mm (approximately 1.2 inch x 16 inches) Strips using 86 of the genuine Samsung lm561c diodes in the spectrum you choose with their still awesome 210 lm/w efficiency plus 4 - 450nm Royal Blue LEDs, 4 - 660nm Deep Red LEDs, and 2 - 730nm Far Red(IR) LEDs. The strips have the wire hook-ups on each end of the board making it so much easier and less messy to wire them in series, parallel, or however you need for your project. For the size, number of diodes, efficiency, versatility, and power capability, you won't find a better deal than these strips. They are rated at 24V and 1800mA max per strip and although they can handle a little more, they are much more efficient in the 1050-1400mA range. There are many other driver/strip configurations that work(too many for me to list), but just ask and I can recommend a custom kit for you and I will try to answer any questions you have or, since we have tons of drivers in stock, we can build you a custom DIY Kit. Check out my other listings for separate listings, different spectrums, mixed sets, sets with heatsinks, blue booster boards, red booster boards, or, if you need a different quantity or custom configuration, just let me know.
    We always have discreet shipping and this is a private listing, so your purchase will remain anonymous on eBay.
    What you get is in the description. Some photos may be stock or show other items for reference only. If you have a question, please ask before purchase.
    IF YOU NEED MORE THAN QUANTITY LISTED, JUST MESSAGE ME AND I WILL INCREASE IT FOR YOU