BUD Booster 48 LED Grow Strip w/ heatsink Red, IR, Both, or UV "Emerson effect"

Description

WHEN IT COMES TO GROW LIGHTING,
THE BEST OPTION AVAILABLE IS STRIPS
1) COVERAGE - make it any size/shape you want/even side lighting is possible
2) CANOPY PENETRATION - more leds spread out gets deeper into canopy
3) VERSATILITY - add on or reconfigure any time you want
We at GrowDaddyLEDs.com are committed to helping you
set up your grow with the largest and best selection of strips around.
WE NOW HAVE FOUR DIFFERENT VERSIONS OF THE BUD BOOSTER STRIPS:
660 STRIP HAS
:
48 - 660NM DEEP RED LEDs
730 STRIP HAS
:
48 - 730NM FAR RED(IR) LEDs
660/730 STRIP HAS
:
36 - 660nm Deep Red LEDs
12 - 730nm Far Red(IR) LEDs
UV STRIP HAS
:
24 - 385nm UV LEDs
24 - 400nm UV LEDs
THIS LISTING IS FOR
:
1 - 30mm x 400mm Sun Board Bud Booster Strip in the configuration/color you choose
1 - 40mm x 450mm Heatsink
OPTION AVAILABLE
:
30mm double sided thermally conductive adhesive tape to
make
mounting strips
a breeze and heat exchange better
CLICK HERE FOR JUST THE STRIPS
CLICK HERE FOR THE SINGLE STRIP KIT WITH DRIVER
CLICK HERE FOR THE 3 OR 4 STRIP KIT WITH DRIVER
ALL STRIPS
:
24 watts max
900mA max
24VDC
30mm x 400mm (approximately 1.2" x 16")
Double mounted push-in connectors
Thermal conductivity coefficient of 1.5
2.0 oz. of RA copper
EXTRUDED ALUMINUM HEATSINKS
:
40mm x 450mm x 10mm each
Over half a pound each
This is for 1 of these strips with a heatsink and the option of thermal tape. These are
30mm x 400mm (approximately 1.2 inch x 16 inches) 48
Diode Bud Booster Strips with a hefty 40mm x 450mm heatsink. These are perfect to add to the 96 Diode strips in my other listings as they are the exact same size.
I can also apply double sided thermally conductive tape to the strip so all you would need to do is pull the release paper and press it onto the included heatsink. Not only does it hold strong, it also helps transfer the heat from the board to the heatsink.
These have the hook-ups on each end of the board making it so much easier and less messy to wire them in series or however you need to.
They are rated at 24V and 600-900mA per strip
and can put out from 18-24 watts(if used with a constant current driver) of red, IR, or UV boosting power to make your buds the best they can be
.
If you wire 2 of these in parallel, you can then wire them into a series of the lm561c, lm301b, or lm301h strips or even the blue booster strips and run them all on the same 1400mA or 1750 mA constant current driver. They do work the best on a constant current driver.
This is for ONE STRIP and heatsink with the option for thermal tape.
Anything else in the pics is for reference and not included. It just shows you a little of what can be done with these strips. Only your imagination can stop you.
Check out my other listings for strips with heatsinks, different spectrums, mixed sets, Complete DIY Kits, sets with heatsink(s), blue booster boards, etc. If you need a different quantity, custom configuration, complete DIY kit for a custom light, just send me a message or give me a call. We always have DISCREET SHIPPING and this is a private listing, so your purchase will remain anonymous on eBay.
What you get is in the description. Some photos may be stock or show other items for reference only. If you have a question, please ask before purchase.
IF YOU NEED MORE THAN QUANTITY LISTED, JUST MESSAGE ME AND I WILL INCREASE IT FOR YOU