Tool Oil Needle Insertion Tool Oil Needle Press-in Hydraulic Hose Cutter

Description

Type:Oil Needle Insertion Tool
Size: 61.7*93.4*24mm
Net Weight: 126.6g
Color:Black
Packing includes:1pc Oil Needle Insertion Tool,1pc Tube Cutter
Material: Aluminum Alloy
Features:
The product body is made of high-strength aluminum alloy + stainless steel thimble,Compatible with a variety of specifications, statically pressed in, to get rid of the problem of warping, wrinkling and deformation of the tubing caused by violence, and a tubing cutter as a gift.
For: Suitable For Installation Of Common 5/5.5mm Tubing And Oil Needle Or Five-Wire Body.
Five-wire installation Steps:
1. Connect the five-wire installation device as shown in the figure
2. Holding the tool in your left hand, slowly turn the handle with your right hand until the oil needle is completely pressed in
3. Installation is complete
4. Effect display
BH90/BH59 installation Steps:
1. Clamp the tubing as shown in the figure, and the copper sleeve is about 1mm above the tubing section
2. Install the oil needle as shown in the figure to make the oil needle align with the inner hole of the oil pipe
3. Hold the copper sleeve with your thumb, and slowly turn the handle with the other hand to put the oil needle into the oil pipe
4. Installation is complete
5.Note: The inner hole of the installed oil needle must be larger than the diameter of the cylinder to install
1. Clamp the tubing as shown in the figure, and the copper sleeve is about 1mm above the tubing section
2. Install the oil needle as shown in the figure to make the oil needle align with the inner hole of the oil pipe
3. Hold the copper sleeve with your thumb, and slowly turn the handle with the other hand to put the oil needle into the oil pipe
4. Installation is complete
5.Note: The inner hole of the installed oil needle must be larger than the diameter of the cylinder to install